|
|
|
National Stock Number:
3040-00-518-6309
Federal Supply Class:
3040
National Item Identification Number:
005186309
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 1015005186309 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 110524 | 63810 | WARNER ELECTRIC BRAKE AND CLUTCH CO HQ | | 5186309 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 3040005186309 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | LARGEST STEP DIAMETER | 0.970 INCHES NOMINAL | | OVERALL LENGTH | 4.312 INCHES NOMINAL | | MATERIAL | STEEL COMP 3140 OR STEEL COMP 4140 | | SECOND END DIAMETER | 0.6860 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 2.835 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.835 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6850 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.5850 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1010 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.6460 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 36 | | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) | | SPECIAL FEATURES | FIRST END HAS ROUND ATTACHMENT,0.265 IN LONG AND 0.493 IN DIA,POSITIONED FROM TOP TO CENTER OF END DIA; FIRST END IS 0.970 IN DIA STEPPEDTO 0.686 IN DIA SHAFT,2.414 IN LONG | | STEP QUANTITY | 4 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|