|
|
|
National Stock Number:
3040-00-507-3231
Federal Supply Class:
3040
National Item Identification Number:
005073231
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM | | FIRST END HOLE DEPTH | 0.237 INCHES MINIMUM AND 0.256 INCHES MAXIMUM | | FIRST END HOLE DIAMETER | 0.1420 INCHES MINIMUM AND 0.1440 INCHES MAXIMUM | | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.815 INCHES NOMINAL | | FIRST END STYLE | UNTHREADED CROSS DRILLED | | OVERALL LENGTH | 2.430 INCHES MINIMUM AND 2.450 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1045 OR STEEL COMP 1145 | | SECOND END GROOVE DIAMETER | 0.8320 INCHES MINIMUM AND 0.8380 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0460 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM | | SECOND END HOLE DEPTH | 0.061 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | SECOND END HOLE DIAMETER | 0.1590 INCHES NOMINAL | | SECOND END DIAMETER | 0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.190 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED | | SPECIAL FEATURES | FIRST END THREE ADDITIONAL UNTHD CROSS DRILLED HOLES 90 DEG ANGLES BTWN HOLES; FIRST END INTERNAL BORE 0.625 IN. NOM DIA,2.065 IN. NOM DP;SECOND END SIX INTERNAL SPLINES 0.566 IN. DIA,0.375 IN. NOM SPLINE LG | | SURFACE FINISH | 63.0 MICROINCHES |
|
|