|
|
|
National Stock Number:
3040-00-499-1774
Federal Supply Class:
3040
National Item Identification Number:
004991774
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 567-8914-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1246 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | OVERALL LENGTH | 0.673 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.280 INCHES MINIMUM AND 0.281 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.2809 INCHES MINIMUM AND 0.2813 INCHES MAXIMUM | | SECOND END TONGUE THICKNESS | 0.156 INCHES MINIMUM AND 0.157 INCHES MAXIMUM | | SECOND END TONGUE WIDTH | 0.437 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.050 INCHES MINIMUM AND 0.053 INCHES MAXIMUM | | SECOND END STYLE | TONGUE | | SPECIAL FEATURES | FIRST END STYLE CHAMFERED 0.010 MIN TO 0.015 MAX IN. BY 45.0 DEG;SECOND END STYLE TONGUE-ONE SIDE NOTCHED W/ 90.0 DEG ANGLE;PASSIVATED FINISH PER QQ-P-35,TYPE II (COLLINS 580-0025-000) | | STEP QUANTITY | 2 |
|
|