|
|
|
National Stock Number:
3040-00-499-1750
Federal Supply Class:
3040
National Item Identification Number:
004991750
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 567-8778 | 13499 | ROCKWELL COLLINS, INC. | | 567-8778-001 | 04YE2 | VALCORE MANUFACTURING LLC | | 567-8778-001 | 13499 | ROCKWELL COLLINS, INC. | | 567-8778-001 | 20723 | VALCORE MANUFACTURING LLC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1246 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.312 INCHES NOMINAL | | OVERALL LENGTH | 1.868 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DIAMETER | 0.2525 INCHES NOMINAL | | SECOND END SLOT DEPTH | 0.050 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.045 INCHES MINIMUM AND 0.054 INCHES MAXIMUM | | SECOND END STYLE | SLOTTED | | STEP QUANTITY | 10 | | SPECIAL FEATURES | SECOND END FLATTED TO 0.223 IN. DIA; HAS DETENT TOOTH IN SLOT |
|
|