|
|
|
National Stock Number:
3040-00-494-1432
Federal Supply Class:
3040
National Item Identification Number:
004941432
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 612383-1 | 07217 | HONEYWELL LIMITED |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1240 INCHES NOMINAL | | FIRST END STEP LENGTH | 0.530 INCHES NOMINAL | | FIRST END STYLE | TONGUE | | FIRST END TONGUE THICKNESS | 0.124 INCHES NOMINAL | | FIRST END TONGUE WIDTH | 0.124 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.249 INCHES NOMINAL | | OVERALL LENGTH | 1.930 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,303SE,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303SE | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.060 INCHES NOMINAL | | SECOND END DIAMETER | 0.2490 INCHES NOMINAL | | SECOND END HOLE DEPTH | 0.249 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.0320 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | STEP QUANTITY | 2 |
|
|