|
|
|
National Stock Number:
3040-00-490-0864
Federal Supply Class:
3040
National Item Identification Number:
004900864
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| CPR101216 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END ANGLE BETWEEN HOLES | 360.0 DEGREES NOMINAL | | FIRST END DIAMETER | 2.2479 INCHES MINIMUM AND 2.2486 INCHES MAXIMUM | | FIRST END DISTANCE BETWEEN HOLE CENTERS | 2.690 INCHES NOMINAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.690 INCHES NOMINAL | | FIRST END HOLE DEPTH | 1.440 INCHES NOMINAL | | FIRST END HOLE DIAMETER | 0.1900 INCHES MINIMUM AND 0.2050 INCHES MAXIMUM | | FIRST END STYLE | TWO CROSS DRILLED HOLES | | OVERALL LENGTH | 8.880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A304 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8620 OR STEEL COMP 8720 OR STEEL COMP 8615 | | SECOND END DIAMETER | 2.2479 INCHES MINIMUM AND 2.2486 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO FLAT | 0.190 INCHES NOMINAL | | SECOND END GROOVED FLAT DEPTH | 0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | SECOND END GROOVED FLAT LENGTH | 0.1600 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | SECOND END INTERNAL THREAD LENGTH | 0.190 INCHES MINIMUM AND 0.222 INCHES MAXIMUM | | SECOND END STYLE | FLAT GROOVED AND INTERNALLY THREADED | | SPECIAL FEATURES | SECOND END BORED,0.190/0.205 IN. DIA,6.500 IN. LG;SECOND END COUNTERBORED,0.750 IN. DIA,0.380/0.410 IN. LG | | SURFACE FINISH | 16.0 MICROINCHES |
|
|