|
|
|
National Stock Number:
3040-00-477-0557
Federal Supply Class:
3040
National Item Identification Number:
004770557
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.5010 INCHES MINIMUM AND 0.5040 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.250 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 316 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316 | | NOMINAL THREAD SIZE | 0.190 INCHES SINGLE HOLE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | SINGLE HOLE UNF | | SECURING HOLE QUANTITY | 2 | | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE | | SMALL END DIAMETER | 0.623 INCHES MINIMUM AND 0.627 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE TREATMENT | PASSIVATE | | THICKNESS | 0.312 INCHES NOMINAL |
|
|