|
|
|
National Stock Number:
3040-00-475-2028
Federal Supply Class:
3040
National Item Identification Number:
004752028
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 537-600-116 | 00607 | GAP INSTRUMENT CORP | | 537-600-116 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 537-600-116 | 07CR8 | ADVANCED LOGIC RESOURCES INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.0933 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | PLOTTING BOARD,NAVIGATIONAL | | LARGEST STEP DIAMETER | 0.125 INCHES NOMINAL | | OVERALL LENGTH | 0.315 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 | | SECOND END GROOVE DIAMETER | 0.0260 INCHES MINIMUM AND 0.0280 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0120 INCHES MINIMUM AND 0.0140 INCHES MAXIMUM | | SECOND END DIAMETER | 0.0464 INCHES MINIMUM AND 0.0466 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 2 |
|
|