|
|
|
National Stock Number:
3040-00-470-6089
Federal Supply Class:
3040
National Item Identification Number:
004706089
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 030175 | 24378 | DIESEL PARTS CO OF CALIFORNIA | | 030175 | 31361 | WOODWARD, INC. | | 03040-67 | 31361 | WOODWARD, INC. | | 030175 | 66503 | WOODWARD, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6230 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 36 | | FIRST END STYLE | SPLINED (INVOLUTE) | | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.938 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6230 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.5960 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.811 INCHES NOMINAL | | OVERALL LENGTH | 3.096 INCHES NOMINAL | | MATERIAL | STEEL | | SPECIAL FEATURES | 2ND END W/LONGITUDINAL PRESSURE LUBRICATING HOLE DRILLED 0.850 IN. DEEP TO CROSS DRILLED HOLE IN LARGEST DIA | | SECOND END DIAMETER | 0.8110 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.178 INCHES NOMINAL | | SECOND END STYLE | TONGUE ROUNDED ENDS | | SECOND END TONGUE THICKNESS | 0.244 INCHES NOMINAL | | SECOND END TONGUE WIDTH | 0.784 INCHES NOMINAL | | STEP QUANTITY | 4 |
|
|