|
|
|
National Stock Number:
3040-00-463-7485
Federal Supply Class:
3040
National Item Identification Number:
004637485
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 9850012P001 | 97424 | AMETEK INC | | 9850012P1 | 24446 | GENERAL ELECTRIC COMPANY | | 9850012P1 | 97424 | AMETEK INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END FLAT LENGTH | 0.180 INCHES NOMINAL | | FIRST END STYLE | TAPERED WITH FLAT | | FIRST END TAPER LENGTH | 0.180 INCHES NOMINAL | | FSC APPLICATION DATA | TRANSMITTER,RATE OF FLOW | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.0175 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1600 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0180 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED |
|
|