|
|
|
National Stock Number:
3040-00-463-0908
Federal Supply Class:
3040
National Item Identification Number:
004630908
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| C5P27017 | 5H860 | THOMAS INSTRUMENT, INCORPORATED | | C5P27017 | 78567 | SPECO CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3408 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.3408 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.2420 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FIRST END PITCH DIAMETER | 0.3125 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.4400 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.436 INCHES NOMINAL | | OVERALL LENGTH | 4.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643, 17-4PH ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE | | SECOND END DIAMETER | 0.3125 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.6200 INCHES NOMINAL | | SECOND END STYLE | EXTERNAL THREADED | | STEP QUANTITY | 5 | | SPECIAL FEATURES | SECOND END THREADED 5/16-24UNF-2A WITH .06W X .09D IN. SLOT | | SURFACE FINISH | 63.0 MICROINCHES |
|
|