|
|
|
National Stock Number:
3040-00-460-5122
Federal Supply Class:
3040
National Item Identification Number:
004605122
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 790-0905-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.1569 INCHES MINIMUM AND 0.1572 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | RADIO AND TELEVISION COMMUNICATIONS EQUIPMENT,EXCEPT AIRBORNE | | LARGEST STEP DIAMETER | 0.1869 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,CLASS 303,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 0.560 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.016 INCHES NOMINAL | | SECOND END DIAMETER | 0.1869 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0250 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 0.1750 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 2 |
|
|