3040-00-454-2507, SHAFT,SHOULDERED

National Stock Number:
3040-00-454-2507

Federal Supply Class:
3040

National Item Identification Number:
004542507

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Manufacturer Information:

968459-1

99193

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
FIRST END DIAMETER	0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER	0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
FIRST END SPLINE MINOR DIAMETER	0.3659 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
FIRST END SPLINE QUANTITY	11
FIRST END STYLE	SPLINED (INVOLUTE)
FIRST END PITCH DIAMETER	0.4344 INCHES NOMINAL
FIRST END PRESSURE ANGLE	30.0 DEGREES NOMINAL
FIRST END SPLINE LENGTH	0.4800 INCHES NOMINAL
LARGEST STEP DIAMETER	0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
OVERALL LENGTH	4.830 INCHES MINIMUM AND 4.850 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
SECOND END DIAMETER	0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
SECOND END PITCH DIAMETER	0.3358 INCHES NOMINAL
SECOND END PRESSURE ANGLE	30.0 DEGREES NOMINAL
SECOND END SPLINE LENGTH	0.6400 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER	0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
SECOND END SPLINE MINOR DIAMETER	0.2942 INCHES MINIMUM AND 0.3023 INCHES MAXIMUM
SECOND END SPLINE QUANTITY	11
SECOND END STYLE	SPLINED (INVOLUTE)
STEP QUANTITY	4
SURFACE FINISH	32.0 MICROINCHES

Click here to Register for Free 30-day Trial