|
|
|
National Stock Number:
3040-00-447-2220
Federal Supply Class:
3040
National Item Identification Number:
004472220
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 204163 | 12603 | CLARK EQUIPMENT CO | | 204163 | 89749 | CLARK MATERIAL HANDLING COMPANY | | 2095529 | 22852 | SPALLA INC | | 2095529 | 24617 | GENERAL MOTORS CORP | | 666951 | 58275 | SASCO INC CANADIAN DIV | | 2095529 | 7X677 | GENERAL MOTORS LLC | | 7735523 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | T93-2 | 79410 | LIBERTY VENTURES INTI LLC | | TG1 | 98435 | MARMON GROUP INC THE ACTIVE GEAR CO DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7490 INCHES MINIMUM AND 0.7495 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | MAIN SHAFT,TRANSMISSION,VEHICULAR | | LARGEST STEP DIAMETER | 2.229 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI OR SAE ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 16.970 INCHES NOMINAL | | MATERIAL | STEEL COMP 4620 | | SECOND END DIAMETER | 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL | | SECOND END EXTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1560 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | STEP QUANTITY | 8 |
|
|