|
|
|
National Stock Number:
3040-00-445-5183
Federal Supply Class:
3040
National Item Identification Number:
004455183
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 10920666 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 3.750 INCHES NOMINAL | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.600 INCHES MINIMUM AND 0.605 INCHES MAXIMUM | | FEATURES PROVIDED | COUNTERBORE | | LINK END HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.377 INCHES MAXIMUM | | LINK END THICKNESS | 1.218 INCHES NOMINAL | | MAJOR DIAMETER | 0.875 INCHES MINIMUM AND 0.878 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-681, CLASS 65-35 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINOR DIAMETER | 0.812 INCHES MINIMUM AND 0.815 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SHAFT END THICKNESS | 0.647 INCHES MINIMUM AND 0.653 INCHES MAXIMUM | | SPECIAL FEATURES | OFFSET HEIGHT: 1.163 IN. NOMINAL | | SPLINE QUANTITY | 27 | | STYLE DESIGNATOR | OFFSET, CLEVIS LINK END | | SURFACE TREATMENT | CADMIUM AND CHROMATE |
|
|