| CASING MATERIAL | NICKEL COPPER ALLOY |
| CASING SURFACE TREATMENT | PASSIVATED |
| CASING LENGTH BETWEEN FERRULES | 8.437 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| END CONNECTION TYPE | UNION FERRULE BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 2B BOTH ENDS |
| THREAD LENGTH | 0.469 INCHES NOMINAL BOTH ENDS |
| END OVERALL DIAMETER | 0.437 INCHES NOMINAL BOTH ENDS |
| WRENCHING FACILITY TYPE | SERRATED SURFACE BOTH ENDS |
| WRENCHING FACILITY OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | COPPER |
| CORE OVERALL LENGTH | 9.594 INCHES NOMINAL |
| CORE DIAMETER | 0.188 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED FIRST END |
| THREADED MALE SECOND END |
| TIP LENGTH | 0.469 INCHES NOMINAL BOTH ENDS |
| CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER FIRST END |
| 0.375 INCHES NOMINAL DIAMETER SECOND END |
| SETSCREW | NOT INCLUDED FIRST END |
| INCLUDED SECOND END |
| SPLINE TYPE | INVOLUTE FIRST END |
| SPLINE QUANTITY | 12 FIRST END |
| SPLINE MAJOR DIAMETER | 0.292 INCHES NOMINAL FIRST END |
| SPLINE MINOR DIAMETER | 0.226 INCHES NOMINAL FIRST END |
| SPLINE LENGTH | 0.437 INCHES NOMINAL FIRST END |
| PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| CORE TIP THREAD CLASS | 2A SECOND END |
| CORE TIP THREAD DIRECTION | RIGHT-HAND SECOND END |
| CORE TIP THREAD LENGTH | 0.469 INCHES NOMINAL SECOND END |
| CORE REMOVABILITY | NONREMOVABLE |
| OVERALL LENGTH | 10.062 INCHES NOMINAL |
| TORSIONAL DEFLECTION RATING | 0.2 DEG PER IN.-LB WINDING AND UNWINDING TORSIONAL DEFLECTION |
| SPECIAL FEATURES | 0.126 IN. DIA BORE 0.375 IN. DEEP @WITH 0.038 IN. DIA PIN THRU 0.281 @IN. @FROM END SECOND CORE END |