|
|
|
National Stock Number:
3020-00-587-6996
Federal Supply Class:
3020
National Item Identification Number:
005876996
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 8426345 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| BODY RECESS NOMINAL DEPTH | 0.2660 INCHES FIRST END | | BODY STYLE | WEBBED, SOLID | | BORE NOMINAL DIAMETER | 1.100 INCHES BOTH ENDS | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | END NOMINAL DIAMETER | 1.573 INCHES SECOND END | | FACE NOMINAL WIDTH | 1.000 INCHES | | FIRST GROOVE NOMINAL DIAMETER | 1.468 INCHES SECOND END | | FIRST GROOVE NOMINAL WIDTH | 0.070 INCHES SECOND END | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE 1330H,8630H,4130H FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1330H AND STEEL COMP 8630H AND STEEL COMP 4130H OVERALL | | PITCH DIAMETER | 4.5000 INCHES NOMINAL | | PITCH ANGLE | 45.0000 DEGREES | | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.092 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.687 INCHES SECOND END | | NOMINAL OVERALL LENGTH | 1.641 INCHES | | NOMINAL OUTSIDE DIAMETER | 4.6768 INCHES | | PRESSURE ANGLE | 45.0000 DEGREES | | SPLINE PITCH DIAMETER | 1.0000 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 16 BOTH ENDS | | STYLE DESIGNATOR | SIDE FACE, BACK HUB PROTRUDING | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TYPE Z,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-16232,TYPE M,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE AND PHOSPHATE ZINC OVERALL | | TEETH QUANTITY | 36 | | TEETH TYPE | STRAIGHT |
|
|