|
|
|
National Stock Number:
3020-00-570-6490
Federal Supply Class:
3020
National Item Identification Number:
005706490
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| C310140267 | 88818 | KEARFOTT CORPORATION |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE NOMINAL DIAMETER | 0.119 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | FACE NOMINAL WIDTH | 0.064 INCHES | | HUB NOMINAL DIAMETER | 0.187 INCHES FIRST END | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB STYLE DESIGNATOR | PLAIN SECOND END | | HUB NOMINAL DIAMETER | 0.251 INCHES SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI 347/SAE 30347 FED STD SINGLE MATERIAL RESPONSE HUB | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL | STEEL COMP 302 BODY | | MATERIAL | STEEL COMP 347 HUB | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.035 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.182 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 0.8520 INCHES | | NOMINAL OVERALL LENGTH | 0.281 INCHES | | PITCH DIAMETER | 0.8330 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPECIAL FEATURES | TWO SPRINGS FURNISHED | | STYLE DESIGNATOR | SIDE FACE, FRONT HUB FLUSH, BACK HUB PROTRUDING | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEETH QUANTITY | 80 |
|
|