|
|
|
National Stock Number:
3020-00-542-4549
Federal Supply Class:
3020
National Item Identification Number:
005424549
Description:
GEAR,SPUR
Detail:
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION.
|
Manufacturer Information:
| 69B4951-1 | 18894 | AIR ARMAMENT CENTER/ EN |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 1.263 INCHES BOTH ENDS | | FACE NOMINAL WIDTH | 1.000 INCHES | | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM OVERALL | | HUB NOMINAL DIAMETER | 1.263 INCHES FIRST END | | HUB NOMINAL DIAMETER | 1.275 INCHES SECOND END | | HUB STYLE DESIGNATOR | PLAIN SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4615 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.816 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.434 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.649 INCHES | | NOMINAL OVERALL LENGTH | 4.250 INCHES | | PITCH DIAMETER | 2.5000 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPECIAL FEATURES | FIRST END HUB STYLE EXTERNALLY INVOLUTE SPLINED | | SPLINE PITCH DIAMETER | 1.2500 INCHES NOMINAL SECOND END | | SPLINE PITCH DIAMETER | 1.6875 INCHES NOMINAL FIRST END | | SPLINE QUANTITY | 12 BOTH ENDS | | SPLINE QUANTITY | 5 FIRST END | | STYLE DESIGNATOR | PROTRUDING HUBS | | TEETH QUANTITY | 30 | | TOOTH FORM | STANDARD |
|
|