| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.154 INCHES FIRST END |
| END NOMINAL LENGTH | 0.030 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.030 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.320 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.300 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.190 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.717 INCHES |
| PITCH DIAMETER | 0.6969 INCHES MINIMUM AND 0.6979 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 67 |
| TOOTH FORM | STUB |