| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 2.000 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 2.249 INCHES FIRST END |
| END NOMINAL LENGTH | 0.031 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.494 INCHES |
| FIRST STEP NOMINAL DIAMETER | 2.644 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.909 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 2.644 INCHES SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 80 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 4 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.060 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.940 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.723 INCHES |
| NOMINAL OVERALL LENGTH | 1.065 INCHES |
| PITCH DIAMETER | 2.6990 INCHES MINIMUM AND 2.7000 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 216 |
| TOOTH FORM | STANDARD |