|
|
|
National Stock Number:
3020-00-481-2444
Federal Supply Class:
3020
National Item Identification Number:
004812444
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| P17-2-35C | 00141 | ROLLER BEARING CO OF AMERICA, INC |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | FACE NOMINAL WIDTH | 0.187 INCHES | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE HUB | | MATERIAL | ALUMINUM ALLOY 2024 BODY | | MATERIAL | STEEL COMP 303 HUB | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.240 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 1.5400 INCHES | | PITCH DIAMETER | 1.4573 INCHES MINIMUM AND 1.4583 INCHES MAXIMUM | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT | ANODIZE BODY | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 35 | | TOOTH FORM | STANDARD |
|
|