ATTACHMENT METHOD | MOUNTING HOLE |
BODY STYLE | PLAIN, SOLID |
BORE NOMINAL DIAMETER | 0.350 INCHES BOTH ENDS |
BORE STYLE | PLAIN BOTH ENDS |
FACE NOMINAL WIDTH | 0.188 INCHES |
HUB NOMINAL DIAMETER | 0.627 INCHES SECOND END |
HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END |
HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B16 ASSN STD SINGLE MATERIAL RESPONSE BODY |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15035 TYPE FBM MIL SPEC SINGLE MATERIAL RESPONSE TEETH |
MATERIAL | COPPER ALLOY BODY |
MATERIAL | PLASTIC PHENOLIC TEETH |
MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
MOUNTING HOLE NOMINAL THREAD SIZE | 0.164 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.015 INCHES SECOND END |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.312 INCHES FIRST END |
NOMINAL OUTSIDE DIAMETER | 2.079 INCHES |
PITCH DIAMETER | 1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
PRESSURE ANGLE | 14.5000 DEGREES |
SPECIAL FEATURES | THREADED HOLES LOCATED 90 DEG APART,1 SECURING HOLE COUNTERBORE 3/16 IN. DIA BY 1/8 IN. DEEP |
STYLE DESIGNATOR | PROTRUDING HUBS |
TEETH QUANTITY | 48 |
TOOTH FORM | STANDARD |