1430-00-439-8361 AMPLIFIER,INTERMEDIATE FREQUENCY Index 1650-00-439-8383 HOUSING,HYDRAULIC P

National Stock Number:
3020-00-439-8365

Federal Supply Class:
3020

National Item Identification Number:
004398365

Description:
GEAR,ANTIBACKLASH,SPUR

Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.


Manufacturer Information:
917694618876U S ARMY AVIATION AND MISSILE COMMAND
917694718876U S ARMY AVIATION AND MISSILE COMMAND
P4-5-20000141ROLLER BEARING CO OF AMERICA, INC


Techincal Specification:
ATTACHMENT METHODMOUNTING HOLE
BORE NOMINAL DIAMETER0.250 INCHES BOTH ENDS
BORE STYLEPLAIN BOTH ENDS
FACE NOMINAL WIDTH0.104 INCHES
FURNISHED ITEMS AND QUANTITY2 SETSCREW
HUB STYLE DESIGNATORPLAIN FIRST END
HUB STYLE DESIGNATORTHREADED SECOND END
HUB NOMINAL DIAMETER0.500 INCHES FIRST END
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE FIRST GEAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE SECOND GEAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE HUB
MATERIALALUMINUM ALLOY 2024 FIRST GEAR
MATERIALALUMINUM ALLOY 2024 SECOND GEAR
MATERIALSTEEL COMP 303 HUB
MATERIALSTEEL COMP 303 SPRING
MOUNTING HOLE NOMINAL THREAD SIZE0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END
MOUNTING HOLE THREAD SERIES DESIGNATORUNC TRANSVERSELY THROUGH HUB, FIRST END
MOUNTING HOLE TYPE AND QUANTITY2 THREADED TRANSVERSELY THROUGH HUB, FIRST END
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.224 INCHES SECOND END
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.281 INCHES FIRST END
NOMINAL OUTSIDE DIAMETER2.806 INCHES
PITCH DIAMETER2.7776 INCHES NOMINAL
PRECISION CLASSIFICATIONQUALITY NUMBER 10
PRESSURE ANGLE20.0000 DEGREES
STYLE DESIGNATORPROTRUDING HUBS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE FIRST GEAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE SECOND GEAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE HUB
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENTPASSIVATE HUB
SURFACE TREATMENTPASSIVATE SPRING
SURFACE TREATMENTANODIZE FIRST GEAR
SURFACE TREATMENTANODIZE SECOND GEAR
TEETH QUANTITY200
TOOTH FORMSTANDARD


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us