| MATERIAL | STEEL COMP E9310 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND |
| 40.0 ROCKWELL C MAXIMUM OVERALL |
| TEETH QUANTITY | 7 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 28.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| PITCH DIAMETER | 1.1667 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 4.312 INCHES |
| NOMINAL OUTSIDE DIAMETER | 1.500 INCHES |
| FACE NOMINAL WIDTH | 2.124 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.277 INCHES FIRST END |
| 0.911 INCHES SECOND END |
| BORE STYLE | W/COUNTERBORE COUNTERBORE, FIRST END |
| BORE NOMINAL DIAMETER | 0.125 INCHES COUNTERBORE, FIRST END |
| COUNTERBORE NOMINAL DEPTH | 3.148 INCHES COUNTERBORE, FIRST END |
| COUNTERBORE NOMINAL DIAMETER | 0.334 INCHES COUNTERBORE, FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 0.602 INCHES SECOND END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.375 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 24 AXIALLY THROUGH HUB, FIRST END |
| SPECIAL FEATURES | EXTERNALLY SPLINED HUB FIRST END,0.6563 IN.SPLINE PITCH DIA,21 SPLINES |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 00198 |
| DESIGN CONTROL REFERENCE | 88065 |