| OVERALL LENGTH | 8.750 INCHES |
| OVERALL WIDTH | 3.000 INCHES |
| OVERALL HEIGHT | 7.000 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 5.000 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 5.500 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.375 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.375 INCHES |
| MOUNTING FACILITY CIRCLE DIAMETER | 3.312 INCHES |
| INCLOSURE FEATURE | OPEN |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 2.100 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 50.0 OR |
| 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| WINDING TYPE | INDUCTION-SHADED POLE |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A3 FIRST STYLE AND |
| A13 SECOND STYLE SINGLE END |
| HOLE DIAMETER | 0.1900 INCHES NOMINAL SINGLE END |
| THREAD LENGTH | 0.6250 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.5000 INCHES NOMINAL SINGLE END |
| HOLE CENTER TO SHAFT END DISTANCE | 1.1250 INCHES NOMINAL SINGLE END |
| HOLE DEPTH | 0.5000 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNC SINGLE END |
| FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND |
| HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 49524 |
| DESIGN CONTROL REFERENCE | 12-1850-21 |