| OVERALL LENGTH | 7.390 INCHES |
| OVERALL WIDTH | 4.090 INCHES |
| OVERALL HEIGHT | 4.170 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.000 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.357 INCHES SINGLE END |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 SLOT |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.240 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.940 INCHES |
| INCLOSURE FEATURE | OPEN |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC AND |
| DC INPUT |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 4.5 INCH-POUNDS RUNNING |
| WINDING TYPE | SERIES WOUND |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 30.0 MINUTES MAXIMUM ON AND |
| 30.0 MINUTES MINIMUM OFF |
| TEMP RATING | 40.0 OPERATING DEG CELSIUS |
| COOLING METHOD | SELF-VENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 500.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.4995 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.8800 INCHES NOMINAL SINGLE END |
| FLAT DEPTH | 0.0280 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |