| OVERALL LENGTH | 2.922 INCHES |
| OVERALL WIDTH | 1.641 INCHES |
| OVERALL HEIGHT | 1.641 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.469 INCHES SINGLE END |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 0.984 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.310 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 6.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.0005 HORSEPOWER OUTPUT |
| TORQUE RATING AND TYPE | 5.0 INCH-POUNDS RUNNING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 5.0 MINUTES MAXIMUM ON AND |
| 5.0 MINUTES MINIMUM OFF |
| TEMP RATING | 775.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 0.286 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1880 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |