| OVERALL LENGTH | 7.469 INCHES |
| OVERALL WIDTH | 4.031 INCHES |
| OVERALL HEIGHT | 4.094 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.750 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.688 INCHES SINGLE END |
| MOUNTING METHOD | FACE |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 THREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.625 INCHES |
| INCLOSURE FEATURE | OPEN PROTECTED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC AND |
| DC INPUT |
| CURRENT RATING IN AMPS | 1.600 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 0.0833 HORSEPOWER OUTPUT |
| WINDING TYPE | SERIES WOUND |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 40.0 OPERATING DEG CELSIUS |
| COOLING METHOD | SELF-VENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 125.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.5000 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |