| OVERALL LENGTH | 3.020 INCHES |
| OVERALL WIDTH | 3.000 INCHES |
| OVERALL HEIGHT | 2.800 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.020 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 2.625 INCHES |
| INCLOSURE FEATURE | OPEN |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.130 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 1.0 MINUTES MAXIMUM ON AND |
| 9.0 MINUTES MINIMUM OFF |
| TEMP RATING | -28.0 AMBIENT DEG CELSIUS AND |
| 85.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 32.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET BELOW PARALLEL TO SHAFT AXIS SINGLE END |
| SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| HOLE DIAMETER | 0.093 INCHES MINIMUM AND |
| 0.100 INCHES MAXIMUM SINGLE END |
| SHAFT DIAMETER | 0.433 INCHES MINIMUM AND |
| 0.443 INCHES MAXIMUM SINGLE END |
| HOLE CENTER TO SHAFT END DISTANCE | 0.110 INCHES MINIMUM AND |
| 0.140 INCHES MAXIMUM SINGLE END |
| HOLE DEPTH | 0.4430 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |