| OVERALL LENGTH | 6.429 INCHES |
| OVERALL WIDTH | 1.875 INCHES |
| OVERALL HEIGHT | 1.875 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.271 INCHES SINGLE END |
| MOUNTING METHOD | PAD |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.625 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.625 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 1.400 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 21.0 INCH-OUNCES STALLED |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | CONTINUOUS |
| COOLING METHOD | NONVENTILATED |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 36.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND |
| A14 SECOND STYLE SINGLE END |
| THREAD LENGTH | 0.5310 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.312 INCHES NOMINAL FIRST END |
| 0.390 INCHES NOMINAL SECOND END |
| SPLINE LENGTH | 0.7400 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNF SINGLE END |
| SPLINE QUANTITY | 18 SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND |
| VERTICAL MOUNTING POSITION |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 25140 |
| DESIGN CONTROL REFERENCE | 102A181-10 |