| OVERALL LENGTH | 3.374 INCHES |
| OVERALL WIDTH | 1.124 INCHES |
| OVERALL HEIGHT | 1.375 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.531 INCHES SINGLE END |
| MOUNTING METHOD | FLANGE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.137 INCHES |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | DC INPUT |
| CURRENT RATING IN AMPS | 0.250 SINGLE OUTPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.5 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 2.0 INCH-POUNDS RUNNING |
| WINDING TYPE | PERMANENT MAGNET |
| DUTY CYCLE | INTERMITTENT |
| TIME INTERVAL | 2.0 SECONDS MAXIMUM ON AND |
| 3.0 SECONDS MINIMUM OFF |
| TEMP RATING | -55.0 OPERATING DEG CELSIUS AND |
| 85.0 OPERATING DEG CELSIUS AND |
| 45.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| MAXIMUM OPERATING ALTITUDE RATING | 73000.0 FEET |
| TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 42.000 LOW REVOLUTIONS PER MINUTE AND |
| 160.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| HOLE DIAMETER | 0.0900 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.1875 INCHES NOMINAL SINGLE END |
| HOLE CENTER TO SHAFT END DISTANCE | 0.3350 INCHES NOMINAL SINGLE END |
| HOLE DEPTH | 0.1875 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |