| BAFFLE QUANTITY | 3 |
| BODY SHAPE | ROUND |
| COOLANT TYPE | AIR |
| DESIGN TYPE | DRY |
| INLET CONNECTION TYPE | FLANGE SINGLE INLET |
| INLET FLANGE MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL SINGLE INLET0.406 INCHES NOMINAL |
| INLET FLANGE MOUNTING PROVISION AND QUANTITY | 2 HOLES SINGLE INLET2 HOLES |
| INLET FLANGE MOUNTING PROVISION SPACING | 2.670 IN. MIN,2.710 IN. MAX C TO C DIM OF MTG HOLES SINGLE INLET |
| INLET FLANGE SHAPE | OVAL SINGLE INLET |
| INLET LOCATION | LOCATED IN END SECTION OF BODY 0.440 IN. C TO C ABOVE HORIZONTAL CENTER LINE AND 1.120 IN. C TO C LEFT OF VERTICAL CENTER LINE SINGLE INLET |
| INLET PROJECTION LENGTH | 4.075 INCHES NOMINAL SINGLE INLET4.075 INCHES NOMINAL |
| OVERALL DIAMETER | 4.620 INCHES NOMINAL |
| OVERALL LENGTH | 14.700 INCHES NOMINAL |
| MATERIAL | STEEL LOCATION NOT OTHERWISE SPECIFIED |
| MUFFLER DESIGN | BAFFLE |
| OPERATING POSITION | HORIZONTAL |
| OUTLET CONNECTION TYPE | UNTHREADED 1ST OUTLET |
| OUTLET INSIDE DIAMETER | 1.549 INCHES NOMINAL 1ST OUTLET1.549 INCHES NOMINAL |
| OUTLET LOCATION | LOCATED ON SIDE OF BODY 1.640 FROM CENTER OF OPENING TO END OF BODY 1ST OUTLET |
| OUTLET OUTSIDE DIAMETER | 1.625 INCHES NOMINAL 1ST OUTLET1.625 INCHES NOMINAL |
| OUTLET PROJECTION LENGTH | 0.940 INCHES NOMINAL 1ST OUTLET0.940 INCHES NOMINAL |
| SPECIAL FEATURES | INLET CONNECTION CURVES DOWN ON 2.120 IN. RADIUS SO THAT FLANGE IS IN LINE WITH OUTER DIA OF BODY |
| SURFACE TREATMENT | ENAMEL |
| TUBE QUANTITY | 2 |