|
|
|
National Stock Number:
2945-00-438-5652
Federal Supply Class:
2945
National Item Identification Number:
004385652
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 6871245 | 63005 | ROLLS-ROYCE CORPORATION | | 6871245 | 73342 | ALLISON TRANSMISSION INC | | 7576686 | 05228 | PTI TECHNOLOGIES INC. | | 6877284 | 63005 | ROLLS-ROYCE CORPORATION | | 6877284 | 73342 | ALLISON TRANSMISSION INC | | 9053-4202 | 94592 | FLUID CONDITIONING PRODUCTS, INC. | | R9W1315-826 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| BODY DIAMETER | 3.590 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.538 INCHES MINIMUM AND 1.541 INCHES MAXIMUM | | BODY OVERALL LENGTH | 6.200 INCHES MINIMUM AND 6.250 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | LAMINATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 20.0 ABSOLUTE | | FLOW DIRECTION | PARALLEL | | MATERIAL | METAL CONTAINER/CARTRIDGE | | MATERIAL | METAL FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | TEST DATA DOCUMENT | 05228-7576686 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|