|
|
|
National Stock Number:
2940-00-541-3502
Federal Supply Class:
2940
National Item Identification Number:
005413502
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 51150 | 79396 | WIX CORP | | C136A | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | | FF351 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | P150 | 50284 | CHAMPION LABORATORIES, INC. | | PT70 | 12658 | BALDWIN FILTERS INC | | R11 | 64829 | ARVINMERITOR INC |
|
Techincal Specification:
| BODY DIAMETER | 3.312 INCHES MINIMUM AND 3.531 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.468 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | BODY OVERALL LENGTH | 7.562 INCHES MINIMUM AND 7.875 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | LUBRICATING OIL SYSTEM,ENGINE,NONAIRCRAFT | | MATERIAL | METAL CONTAINER/CARTRIDGE | | MATERIAL | COTTON FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE OR 1 CLASS | | SPECIAL FEATURES | FOR BY PASS DESIGNED FILTRATION SYSTEM | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | TEST DATA DOCUMENT | 81348-FF351 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|