|
|
|
National Stock Number:
2940-00-505-6710
Federal Supply Class:
2940
National Item Identification Number:
005056710
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1081 | 050Q3 | NATIONAL AUTOMOTIVE PARTS ASSN/NAPA/ | | 1081 | 0HYJ6 | GENUINE PARTS COMPANY | | 19917-2 | 02978 | RENK AMERICA LLC | | 51081 | 79396 | WIX CORP | | C-131 | 87405 | FACET (OKLAHOMA) LLC | | C-67-P | 12658 | BALDWIN FILTERS INC | | C131 | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | | C302 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | C302 | 7X677 | GENERAL MOTORS LLC | | FF351 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | LM16 | 37099 | LUBER-FINER INC SUB OF CHAMPION LABORATORIES INC AFFIL OF UIS INC | | N16 | 64829 | ARVINMERITOR INC | | P-116 | 56367 | PARMA INDUSTRIES INC | | P67 | 12658 | BALDWIN FILTERS INC | | PC81 | 79396 | WIX CORP | | PM-116 | 56367 | PARMA INDUSTRIES INC | | PN16 | 64829 | ARVINMERITOR INC |
|
Techincal Specification:
| BODY DIAMETER | 3.750 INCHES MINIMUM AND 3.875 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.562 INCHES MINIMUM AND 0.688 INCHES MAXIMUM | | BODY OVERALL LENGTH | 5.062 INCHES MINIMUM AND 5.250 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | LUBRICATING OIL FILTER,ENGINE,NONAIRCRAFT | | MATERIAL | METAL AND PAPER CONTAINER/CARTRIDGE | | MATERIAL | PAPER FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | FOR BY-PASS DESIGNED FILTRATION SYSTEM | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | TEST DATA DOCUMENT | 81348-FF351 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|