| DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 2.906 INCHES NOMINAL |
| DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 8.406 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 90.0 |
| ANGULAR DEVIATION OF FOURTH HOLE FROM THIRD HOLE IN DEG | 90.0 |
| ANGULAR DEVIATION OF THIRD HOLE FROM SECOND HOLE IN DEG | 90.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1050 |
| DISTANCE FROM END TO KEYWAY CENTER | 1.469 INCHES NOMINAL |
| FURNISHED ITEMS | COOLING FAN AND DRIVE PULLEY AND WOODRUFF KEY |
| KEYWAY WIDTH | 0.250 INCHES NOMINAL |
| KEYWAY LENGTH | 1.000 INCHES NOMINAL |
| LARGEST DIAMETER | 1.125 INCHES NOMINAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 70.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 550 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| RECTIFIER LOCATION | SEPARATE |
| SHAFT DRIVE END STYLE | TAPERED SHAFT END, THREADED W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| TAPER LENGTH | 1.344 INCHES NOMINAL |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.750 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.781 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES | UNF |
| VOLTAGE IN VOLTS | 28.0 |