| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1070 |
| BOTTOM MOUNTING HOLE DIAMETER | 0.469 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS | 3.625 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | 5.875 INCHES NOMINAL |
| COTTER PIN HOLE | INCLUDED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.344 INCHES NOMINAL |
| GROUNDING METHOD | INTERNAL |
| KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| PILOT DIAMETER | 3.247 INCHES MINIMUM AND 3.249 INCHES MAXIMUM |
| PILOT HEIGHT | 1.062 INCHES NOMINAL |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 6000 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 600 |
| MOUNTING STYLE | FLANGE MTD W/TWO MTG SLOTS AND ONE MTG HOLE |
| SECOND STEP DIAMETER | 0.750 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| SLOT LENGTH | 1.125 INCHES NOMINAL |
| SLOT WIDTH | 0.500 INCHES NOMINAL |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| THREAD CLASS | 2A |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.782 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES | UNF |
| UNTHREADED PORTION LENGTH | 1.250 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 6.0 |