|
|
National Stock Number: 2910-00-453-7351
Federal Supply Class: 2910
National Item Identification Number: 004537351
Description: FILTER ELEMENT,FLUID
Detail: A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
2A5886 | 11083 | CATERPILLAR INC | 33170 | 79396 | WIX CORP | F-919-C3 | 12658 | BALDWIN FILTERS INC | CAF815 | 13800 | PARKER-HANNIFIN CORPORATION | C1170R03 | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | 918 | 74069 | HASTINGS MANUFACTURING CO | FD-118 | 01637 | FORD MOTOR CRAFT | L370F | 37099 | LUBER-FINER INC SUB OF CHAMPION LABORATORIES INC AFFIL OF UIS INC | IPD2A5886 | 55883 | INDUSTRIAL PARTS DEPOT INC | PCAT4 | 56367 | PARMA INDUSTRIES INC |
|
Techincal Specification:
DESIGN TYPE | NONREUSABLE | BODY DIAMETER | 1.844 INCHES MINIMUM AND 1.875 INCHES MAXIMUM | BODY INSIDE DIAMETER | 0.359 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | BODY OVERALL LENGTH | 7.875 INCHES MINIMUM AND 8.000 INCHES MAXIMUM | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | FLOW DIRECTION | OUTSIDE IN | MATERIAL | COTTON FILTERING MEDIUM | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | PROPRIETARY CHARACTERISTICS | PACS | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
|
|