| DRILLED HOLE DIAMETER | 0.982 INCHES MINIMUM AND 0.985 INCHES MAXIMUM |
| END HOLE TYPE | DRILLED |
| FIRST END FACILITY WIDTH | 0.151 INCHES MINIMUM |
| FIRST END BEARING SEAT | NOT INCLUDED |
| FIRST END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.859 INCHES MINIMUM AND 1.861 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 1.600 INCHES MINIMUM AND 1.608 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 16 |
| FIRST END SPLINE TYPE | STRAIGHT |
| FIRST END TYPE | SPLINED |
| HOLE DEPTH | 0.531 INCHES NOMINAL |
| HOLE QUANTITY | 1 |
| OVERALL LENGTH | 30.688 INCHES NOMINAL |
| MATERIAL | STEEL |
| METALLIC HARDNESS RATING | 35.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SECOND END PITCH DIAMETER | 1.879 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 2.9062 INCHES NOMINAL |
| SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| SECOND END FACILITY DIAMETER | 1.655 INCHES MINIMUM AND 1.655 INCHES MAXIMUM |
| SECOND END FACILITY LOCATION | 2.413 IN. FROM SHAFT END |
| SECOND END FACILITY WIDTH | 0.154 INCHES MAXIMUM |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 |
| SECOND END SPLINE QUANTITY | 12 |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END TYPE | SPLINED |