| FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| FIRST END FACILITY DIAMETER | 1.030 INCHES NOMINAL |
| FIRST END FACILITY LOCATION | 0.220 IN. FROM SHAFT END |
| FIRST END FACILITY WIDTH | 0.120 INCHES NOMINAL |
| FIRST END BEARING SEAT | NOT INCLUDED |
| FIRST END SPLINE LENGTH | 1.619 INCHES NOMINAL |
| FIRST END TYPE | SPLINED |
| FIRST END SPLINE MAJOR DIAMETER | 1.490 INCHES MINIMUM AND 1.495 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 1.255 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 6 |
| FIRST END SPLINE TYPE | STRAIGHT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624, FS4340-CANCELED FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4340 |
| METALLIC HARDNESS RATING | 41.0 NOMINAL ROCKWELL C |
| OVERALL LENGTH | 12.781 INCHES NOMINAL |
| SECOND END BEARING SEAT DIAMETER | 1.312 INCHES NOMINAL |
| SECOND END BEARING SEAT WIDTH | 1.125 INCHES NOMINAL |
| SECOND END BEARING SEAT | INCLUDED |
| SECOND END DISTANCE FROM BEARING SEAT TO END | 2.750 INCHES NOMINAL |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SECOND END SPLINE QUANTITY | 16 |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END TYPE | SPLINED |
| SECOND END PITCH DIAMETER | 1.188 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |