| CONSTRUCTION | SOLID |
| COVER | NOT PROVIDED |
| FIRST END CHAMFER LENGTH | 0.188 INCHES NOMINAL |
| FIRST END CROSS-SECTIONAL SHAPE | SERRATED |
| FIRST END TEETH QUANTITY | 44 |
| FIRST END INTERNAL THREAD LENGTH | 0.812 INCHES NOMINAL |
| FIRST END MAJOR DIAMETER | 2.241 INCHES MINIMUM AND 2.246 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 2.216 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE IN DEG | 50.00 |
| FIRST END SERRATION LENGTH | 1.188 INCHES NOMINAL |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD CLASS | 2B |
| FIRST END THREAD SERIES/TYPE DESIGNATOR | UNC |
| FIRST END THREAD SIZE | 5/8-11 |
| OUTSIDE DIAMETER | 1.845 INCHES MINIMUM AND 1.855 INCHES MAXIMUM |
| OVERALL LENGTH | 67.375 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-45387 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SPECIAL FEATURES | 3/8 IN. CORNER RADIUS ON SMALL END |
| SECOND END CROSS-SECTIONAL SHAPE | SERRATED |
| SECOND END INTERNAL THREAD LENGTH | 0.812 INCHES NOMINAL |
| SECOND END MAJOR DIAMETER | 2.140 INCHES MINIMUM AND 2.145 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 2.115 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE IN DEG | 50.00 |
| SECOND END SERRATION LENGTH | 1.500 INCHES NOMINAL |
| SECOND END TEETH QUANTITY | 42 |
| SECOND END THREAD CLASS | 2B |
| SECOND END THREAD DIRECTION | RIGHT-HAND |
| SECOND END THREAD SIZE | 5/8-11 |
| SECOND END THREAD SERIES/TYPE DESIGNATOR | UNC |
| SOLID BAR END CHARACTERISTIC AT FIRST END | THREADED HOLE |
| SOLID BAR END CHARACTERISTIC AT SECOND END | THREADED HOLE |
| TWIST DIRECTION | CLOCKWISE |