| AFTER END COUPLING DESIGN | INTEGRAL |
| AFTER END DESIGN | STRAIGHT |
| CONSTRUCTION | HOLLOW |
| COUPLING LENGTH | 0.354 FEET NOMINAL |
| COUPLING OUTSIDE DIAMETER | 35.500 INCHES NOMINAL |
| COUPLING THICKNESS | 4.250 INCHES NOMINAL |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES AND FLANGE FACES,BORE SURFACES |
| DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING LENGTH | 0.442 FEET NOMINAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 35.500 INCHES NOMINAL |
| FORWARD END DESIGN | STRAIGHT |
| FORWARD END COUPLING THICKNESS | 4.250 INCHES NOMINAL |
| FORWARD END DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| INSIDE DIAMETER | 13.380 INCHES MINIMUM AND 13.560 INCHES MAXIMUM |
| INTERMEDIATE BEARING SLEEVE LENGTH | 3.833 FEET NOMINAL |
| INTERMEDIATE BEARING SLEEVE OUTSIDE DIAMETER | 20.621 INCHES MINIMUM AND 20.625 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| OVERALL LENGTH | 30.088 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284, CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | COMPOSITION RUST PREVENTIVE |
| SURFACE FINISH | GROUND OR ROUGH MACHINED OR SMOOTH MACHINED |
| UNIT TYPE | LINE SHAFT SECTION |
| USAGE LOCATION | PORT/STARBOARD |