| AFTER END DESIGN | TAPERED |
| AFTER BEARING SLEEVE LENGTH | 6.500 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 13.625 INCHES NOMINAL |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| DEPTH | 1.000 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | PROPELLER NUT 1; PROPELLER KEY,2 |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 1.258 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 13.500 INCHES NOMINAL |
| FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 4.583 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 13.625 INCHES NOMINAL |
| INSIDE DIAMETER | 3.500 INCHES MINIMUM AND 7.000 INCHES MAXIMUM |
| KEYWAY QUANTITY | 3 AND 1 |
| KEYWAY WIDTH | 1.500 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| KEYWAY DEPTH | 0.750 INCHES NOMINAL |
| MAJOR DIAMETER | 8.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 12.533 INCHES NOMINAL |
| OVERALL LENGTH | 2.481 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,FORGED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SPECIAL,FEATURES |
| SPECIAL FEATURES | SHAFT IS COLD ROLLED IN PROPELLER TAPER AREA 9 FT 4-3/4 IN. LG STARTING 2 IN. FORWARD OF THE AFTER TAPER AND EXTENDING 12 IN. BEYOND FORWARD END OF AFTER SLEEVE |
| WIDTH | 2.375 INCHES MINIMUM AND 2.438 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 1.959 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 12.500 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 7.625 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | CENTER |