| AFTER BEARING SLEEVE LENGTH | 6.250 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 17.375 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| DEPTH | 1.625 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | COUPLING,1; COUPLING KEYS,4; PROPELLER KEY,2; PROPELLER NUT,1; COUPLING STUDS,12; COUPLING NUTS,24 |
| FORWARD BEARING SLEEVE LENGTH | 3.120 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 17.375 INCHES NOMINAL |
| FORWARD END COUPLING DESIGN | DETACHABLE |
| FORWARD END COUPLING LENGTH | 1.375 FEET NOMINAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 28.000 INCHES NOMINAL |
| FORWARD END COUPLING THICKNESS | 1.688 INCHES NOMINAL |
| FORWARD END COUPLING TYPE | SLEEVE |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 1.167 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 7.250 INCHES NOMINAL |
| FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| INSIDE DIAMETER | 9.000 INCHES NOMINAL |
| KEYWAY DEPTH | 1.317 INCHES NOMINAL |
| KEYWAY QUANTITY | 3 AND 1 |
| KEYWAY WIDTH | 1.813 INCHES MINIMUM AND 1.876 INCHES MAXIMUM |
| MAJOR DIAMETER | 10.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 16.000 INCHES NOMINAL |
| OVERALL LENGTH | 35.281 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284,COLD ROLLED MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| WIDTH | 2.750 INCHES MINIMUM AND 2.812 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 3.000 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 16.000 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 8.500 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | CENTER |