| AFTER BEARING SLEEVE LENGTH | 11.333 FEET NOMINAL |
| AFTER END DESIGN | TAPERED |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 30.115 INCHES MINIMUM AND 30.125 INCHES MAXIMUM |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | BORE |
| DEPTH | 2.812 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 7.448 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 30.115 INCHES MINIMUM AND 30.125 INCHES MAXIMUM |
| FORWARD END COUPLING DESIGN | DETACHABLE |
| FORWARD END COUPLING OUTSIDE DIAMETER | 44.997 INCHES MINIMUM AND 45.000 INCHES MAXIMUM |
| FORWARD END COUPLING TYPE | FLANGE |
| FORWARD END DESIGN | STRAIGHT |
| FORWARD END COUPLING THICKNESS | 5.750 INCHES NOMINAL |
| FORWARD END DIAMETER | 28.312 INCHES MINIMUM AND 28.314 INCHES MAXIMUM |
| MAJOR DIAMETER | 15.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284, CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| OUTSIDE DIAMETER | 28.250 INCHES NOMINAL |
| OVERALL LENGTH | 50.854 FEET NOMINAL |
| PROTECTIVE COVERING TYPE | COMPOSITION RUST PREVENTIVE |
| QUANTITY | 2 |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 4.417 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 30.125 INCHES MAXIMUM |
| TAPER | 0.500 PER FOOT IN INCHES NOMINAL |
| THREAD QUANTITY | 4 PER INCH |
| THREAD LENGTH | 11.750 INCHES |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | ANY ACCEPTABLE |
| WIDTH | 5.000 INCHES NOMINAL |