| CASING MATERIAL | STEEL |
| CASING SURFACE TREATMENT | ZINC COATED |
| CASING LENGTH BETWEEN FERRULES | 64.000 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.530 INCHES NOMINAL |
| CASING PROTECTIVE DEVICE TYPE | BRAIDED WIRE SHIELD |
| END CONNECTION TYPE | SHOULDERED FERRULE BOTH ENDS |
| END OVERALL DIAMETER | 0.620 INCHES NOMINAL BOTH ENDS |
| SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS |
| SHOULDER OUTSIDE DIAMETER | 0.562 INCHES NOMINAL BOTH ENDS |
| FLANGE THICKNESS | 0.062 INCHES NOMINAL BOTH ENDS |
| SWIVEL END | PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| WIDTH ACROSS FLATS | 0.870 INCHES NOMINAL BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 65.043 INCHES NOMINAL |
| CORE DIAMETER | 0.276 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| TIP LENGTH | 0.521 INCHES NOMINAL BOTH ENDS |
| CROSS SECTION SIZE AND LOCATION | 0.420 INCHES NOMINAL DIAMETER BOTH ENDS |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| SPLINE QUANTITY | 12 BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.270 INCHES NOMINAL BOTH ENDS |
| SPLINE MINOR DIAMETER | 0.228 INCHES NOMINAL BOTH ENDS |
| SPLINE LENGTH | 0.250 INCHES NOMINAL BOTH ENDS |
| PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| CORE REMOVABILITY | NONREMOVABLE |
| OVERALL LENGTH | 65.043 INCHES NOMINAL |
| TORSIONAL DEFLECTION RATING | 30 DEG FT-LB IN. |
| MINIMUM OPERATING RADIUS | 12.000 INCHES |
| FSC APPLICATION DATA | ACTUATORS,MECHANICAL,TRIM TAB |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 98897 |
| MFR SOURCE CONTROLLING REFERENCE | 695694-3 |