| CASING MATERIAL | STEEL |
| CASING LENGTH BETWEEN FERRULES | 8.7812 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.434 INCHES MINIMUM AND |
| 0.446 INCHES MAXIMUM |
| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| THREAD LOCATION | INTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 2B BOTH ENDS |
| THREAD DEPTH | 0.281 INCHES NOMINAL BOTH ENDS |
| OVERALL END SIZE | BOTH ENDS: 0.750 IN. HEX |
| SHANK OUTSIDE DIAMETER | 0.498 INCHES MINIMUM AND |
| 0.502 INCHES MAXIMUM BOTH ENDS |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 9.750 INCHES NOMINAL |
| CORE DIAMETER | 0.250 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| TIP LENGTH | 0.468 INCHES NOMINAL BOTH ENDS |
| CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER BOTH ENDS |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| SPLINE QUANTITY | 12 BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.304 INCHES MINIMUM AND |
| 0.310 INCHES MAXIMUM BOTH ENDS |
| SPLINE MINOR DIAMETER | 0.240 INCHES MINIMUM AND |
| 0.242 INCHES MAXIMUM BOTH ENDS |
| SPLINE LENGTH | 0.232 INCHES MINIMUM AND |
| 0.255 INCHES MAXIMUM BOTH ENDS |
| PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| CORE REMOVABILITY | NONREMOVABLE |
| OVERALL LENGTH | 9.750 INCHES NOMINAL |
| TORSIONAL DEFLECTION RATING | 4 DEG FT-LB IN. TORSIONAL DEFLECTION IN WINDING DIRECTION,5 DEG FT-LB IN. IN UNWINDING DIRECTION |
| MINIMUM OPERATING RADIUS | 3.000 INCHES |
| FSC APPLICATION DATA | ELEVATOR ASSY,LEFT HAND,AIRCRAFT |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 31435 |
| DESIGN CONTROL REFERENCE | 99070-008-26 |