|
|
|
National Stock Number:
1680-00-443-3249
Federal Supply Class:
1680
National Item Identification Number:
004433249
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 31009 | 19156 | MOOG INC | | 31009 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 31009 | 94697 | MOOG INC |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 4.999 INCHES MINIMUM AND 5.001 INCHES MAXIMUM | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.687 INCHES MINIMUM AND 0.692 INCHES MAXIMUM | | LINK END HOLE DIAMETER | 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | LINK END THICKNESS | 1.125 INCHES NOMINAL | | MAJOR DIAMETER | 0.658 INCHES MINIMUM AND 0.667 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MINOR DIAMETER | 0.541 INCHES MINIMUM AND 0.546 INCHES MAXIMUM | | SHAFT SECURING METHOD | SPLINE | | SHAFT END THICKNESS | 0.715 INCHES NOMINAL | | SPECIAL FEATURES | OFFSET HEIGHT: 2.920 IN. NOMINAL | | SPLINE QUANTITY | 14 | | STYLE DESIGNATOR | OFFSET, CLEVIS LINK END | | SURFACE TREATMENT | PASSIVATE |
|
|