| CASING MATERIAL | STEEL |
| CASING SURFACE TREATMENT | GALVANIZED |
| CASING LENGTH BETWEEN FERRULES | 24.875 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.445 INCHES NOMINAL |
| END CONNECTION TYPE | UNION FERRULE BOTH ENDS |
| END OVERALL DIAMETER | 0.875 INCHES NOMINAL BOTH ENDS |
| SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| WRENCHING FACILITY OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 27.561 INCHES NOMINAL |
| CORE DIAMETER | 0.250 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| TIP LENGTH | 0.531 INCHES NOMINAL BOTH ENDS |
| CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER BOTH ENDS |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| SPLINE QUANTITY | 12 BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.307 INCHES NOMINAL BOTH ENDS |
| SPLINE MINOR DIAMETER | 0.241 INCHES NOMINAL BOTH ENDS |
| SPLINE LENGTH | 0.244 INCHES NOMINAL BOTH ENDS |
| PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| CORE REMOVABILITY | NONREMOVABLE |
| OVERALL LENGTH | 27.561 INCHES NOMINAL |
| TORSIONAL DEFLECTION RATING | 5 DEG FT-LB IN WINDING DIRECTION,7 DEG FT-LB IN UNWINDING |
| MINIMUM OPERATING RADIUS | 10.000 INCHES |
| FSC APPLICATION DATA | MISCELLANEOUS AIRCRAFT ACCESSORIES AND COMPONENTS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 31435 |
| DESIGN CONTROL REFERENCE | 31551-026-16 |